model 533, 534, 535 www.vishay.com vishay spectrol revision: 17-apr-13 1 document number: 57065 for technical questions, contact: sferprecisionpot@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 7 / 8 " (22.2 mm) multi turn wirewound potentiometer - 533: 3 turns/534: 10 turns/535: 5 turns note ? the color of this product may eith er be black (us market) or blue (other regions) features ? bushing and servo mount designs available ? special resistance tolerances to 1 % ? rear shaft extensions and support bearing ? metric shaft available ? dual gang configuration and concentric shafts ? high torque, center tap, slipping clutch on request ? special markings and front shaft extensions ? material categorization: for definitions of compliance please see www.vishay.com/doc?99912 quick reference data sensor type rotational, multi turn wirewound output type output by turrets market appliance industrial dimensions 7 / 8 " (22.2 mm) electrical specifications parameter model 533 model 534 model 535 resistance range - standard values 50 ? to 20 k ? 100 ? to 100 k ? 50 ? to 50 k ? capability range 5 ? to 60 k ? 10 ? to 200 k ? 5 ? to 100 k ? standard tolerance 5 % 5 % 5 % linearity (independent) 0.25 % 0.25 % 0.25 % noise 100 ? enr 100 ? enr 100 ? enr rotation (electrical and mechanical) 1080 + 10 - 0 3600 + 10 - 0 1800 + 10 - 0 power rating (at 70 c) 1.0 w 2.0 w 1.5 w insulation resistance 1000 m ? minimum 500 v dc dielectric strength 1000 v rms minimum 60 hz absolute minimum resistance not to exce ed linearity x total resistance or 1 ? , whichever is greater temperature coefficient 20 ppm/c (standard values, wire only) end voltage 0.25 % of total applied voltage, maximum phasing ccw end points - section 2 phased to section 1 within 2 taps center tap only marking unit identification manufacturers name and model number, resistance value and tolerance, linearity specification date code and terminal identification. ? example of a marking for a standard part: 534-11103 resistance values 533 ( ?? 50, 100, 200, 500, 1k, 2k, 5k, 10k, 20k 534 ( ?? 100, 200, 500, 1k, 2k, 5k, 10k, 20k, 50k, 100k 535 ( ?? 50, 100, 200, 500, 1k, 2k, 5k, 10k, 20k, 50k ordering information/description the models 533 (3 turns), 534 (10 turns) an d 535 (5 turns) can be ordered by stating 534 b 2 10k 20k 5 % c bo10 e4 model mounting number of section ohmic value section n o 1 ohmic value section n o 2 tolerance on ohmic value linearity packaging lead finish b: bushing s: servo 0.25 % (std) box of 10 pieces sap part numbering guidelines 534 b 2 103 203 j c b model style number of section ohmic value section n o 1 ohmic value section n o 2 tolerance on ohmic value linearity packaging b: bushing s: servo 103 = 10k 203 = 20k j: 5 % f: 1 % c: 0.25 % custom: l: 0.20 % d: 0.1 % box of 10 pieces
model 533, 534, 535 www.vishay.com vishay spectrol revision: 17-apr-13 2 document number: 57065 for technical questions, contact: sferprecisionpot@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 mounting hardware, washer and panel nut, nickel plated power rating chart single section dimensions in inches (millimeters) mechanical specifications parameter bearing type bushing: sleeve bearing servo: ball bearing torque (maxim ums): starting ? section 1 ? section 2 534 0.5 oz. - in (36 g - cm) 0.9 oz. - in (65 g - cm) 533/535 0.7 oz. - in (50 g - cm) 1.1 oz. - in (79 g - cm) torque (maxim ums): running ? section 1 ? section 2 534 0.4 oz. - in (28.80 g - cm) 0.7 oz. - in (50.40 g - cm) 533/535 0.6 oz. - in (43.20 g - cm) 0.9 oz. - in (64.8 g - cm) weight (maximums) ? section1 ? section 2 0.75 oz. (21.26 g) 1.25 oz. (35.44 g) stop strength 75 oz. - in (static) (5.4 kg - cm) ganging 2 sections maximum 2 1 3 cw schematic 0.750 (19.05) 0.015 0.312 (7.92) 0.015 0.062 (1.57) 0.200 min. (5.08) ? 0.875 (22.22) 0.015 0.030 max. (0.76) 0.812 (20.62) 0.031 ? 0.2497 (6.34) + 0.0000 - 0.0003 0.032 x 0.032 (0.81) x (0.81) dp 0.010 3 / 8 - 32unef - 2a ? 0.4062 (10.32) + 0.0000 - 0.0020 9 mm x 0.75 p ? 6.00 mm 1 2 3 screwdriver slot + 0.000 - 0.0003 0.850 (21.59) 0.015 0.375 (9.52) 0.031 0.062 (1.57) ? 0.7500 (19.05) + 0.0000 - 0.0005 ? 0.875 (22.22) ? 0.1248 (3.17) + 0.0000 - 0.0003 0.057 (1.45) min. 0.300 (7.62) min. ? 0.750 (19.05) max. ? 0.875 (22.22) 0.015 2 1 0.062 (1.57) 30 typ. r 0.625 max. (15.88) bushing mount model: 534b/534-1 servo mount model: 534s/534-2 metric shaft: 534b...8872 3 rated power in w 0 20 40 60 80 100 120 140 160 0 1 2 3 4 534 535 533 ambient temperature in c environmental specifications vibration 15 g thru 2000 hz shock 50 g rotational li fe (shaft revolution) ? 533 ? 534 ? 534 (servo) ? 535 300 000 1 000 000 > 1 000 000 500 000 load life 900 h temperature range - 55 c to + 125 c
model 533, 534, 535 www.vishay.com vishay spectrol revision: 17-apr-13 3 document number: 57065 for technical questions, contact: sferprecisionpot@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 resistance element data resistance value ( ? ) resolution (%) ohms per turn maximum current at 70 c ambient (ma) maximum voltage across coil (v) 533 534 535 533 534 535 533 534 535 533 534 535 533 534 535 50 - 50 0.149 - 0.120 0.0746 - 0.0603 141.0 - 173.0 7.07 - 8.66 100 100 100 0.111 0.060 0.075 0.1114 0.0603 0.0746 100.0 141.0 122.0 10.0 14.1 12.2 200 200 200 0.097 0.037 0.061 0.1954 0.0746 0.1220 70.7 100.0 86.6 14.1 20.0 17.3 500 500 500 0.069 0.031 0.049 0.3424 0.1520 0.2459 44.7 63.2 54.7 22.4 31.6 27.4 1k 1k 1k 0.063 0.025 0.041 0.6331 0.2459 0.4113 31.6 44.7 38.7 31.6 44.7 38.7 2k 2k 2k 0.041 0.021 0.031 0.8206 0.4113 0.6331 22.4 31.6 27.4 44.7 63.2 54.8 5k 5k 5k 0.044 0.016 0.034 2.2330 0.8206 1.7230 14.1 20.0 17.3 70.7 100.0 86.6 10k 10k 10k 0.034 0.017 0.030 3.4510 1.7230 3.0160 10.0 14.1 12.2 100.0 141.0 122.0 20k 20k 20k 0.031 0.015 0.020 6.1790 3.0160 3.9910 7.07 10.0 8.66 141.0 200.0 173.0 - 50k 50k - 0.009 0.015 - 4.6690 7.4560 - 6.32 5.47 - 316.0 274.0 - 100k - - 0.007 - - 7.4560 - - 4.47 - - 447.0 - --------------- ---------------
legal disclaimer notice www.vishay.com vishay revision: 02-oct-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized vishay personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. vishay intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some vishay documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards.
|
